Monitoring instrument data

Review data from your connected instruments from the Production->Data menu or from the data list shown in each instrument record Production->Instruments->Choose Instrument

All instrument data includes a common header which will begin with a banner to clearly indicate the overall status of this procedure.

If the instrument operation completed with all parameters within expected values you will see:

If the instrument triggered an alarm during operation:

If the instrument triggered an alarm which has since been acknowledged:

Here is an example header from a Sepax procedure. Certain fields are greyed out and cannot be edited as they come directly from the instrument. Here the comment field shows the protocol selected for this procedure and the Sepax has automatically populated the Procedure ID field, Start time and End time. The run has been named based on the procedure ID but this field is free for you to edit to something more memorable. For a detailed description of each of these fields please see Instrument data summary information

Note that the instrument has recorded some initials for the user operating the device. From Chronicle v3.1 it is also possible for two people to electronic sign any instrument data record. The operator can click the "Confirm operator" button to sign the record as shown below:

A second user can confirm they checked the procedure by signing as the verifier in exactly the same way.

After the common header information, instruments will then present data in different ways depending on the instrument. Please see the following examples:

Example VIA Thaw CB1000 data

Example Sepax data

Example Xuri Wave 25 data

Example Sefia data

Example VIA Freeze data

Example ÄKTA data

Example Flow Cytometer data